- For modern agricultureProductsSpreadersHS 240 Tandem-axle spreader
The tandem spreader HS 240 offers users an impressive loading volume of 22 cbm. When operated continuously, the machine can spread outstanding quantities of up to 500,000 cbm a year, making the HS 240 ideal for challenges of any size.
Contact
Technical Data
Technical Data
| Total weight | 24,000 kg |
| Useful load | 14,000 kg |
| Support load | 4,000 kg |
| Bridge size | 7,900 mm x 2,300 mm |
| Box dimensions | 6,600 mm x 2,210 mm |
| Height of side walls | 1.400 mm |
| Usable load capacity, approx. | 22 cbm |
| Loading height in basic version, approx. | 3.000 mm |
| Axle | 10-hole wheel connection |
| Tires | 710/50 R 26.5 |
Chassis
- Hydraulic suspension, with levelling valve
- BPW axles with trailing self-steering axle
- Fist axle as a lifting axle > chassis as interchange system, locked with container locks
- Without container locks in combination with item 20072
- Drawbar with spring suspension, swivel ring Ø 50 mm
- 10-t jack stand with 2-step gearbox, support foot can be adjusted separately
- LED lights pursuant to German road traffic regulations (StVZO), light system 12 V, connecting cable, socket
- 4-wheel air brake with ALB controller, tristop cylinder as a parking brake
Body/endless floor
- Body as an interchange system, locked with container locks
- Steel side walls 3 mm thick, 1,400 mm high, smooth on the inside, welded on the outside,
- Grille and rubber sealing in the front wall
- Hydraulically-actuated, swivel-mounted rear hood
- Two conveyors with four round steel chains 14 x 50 mm (breaking load 4 x 24 t)
- Steel floor
- Gearbox with hydr. motor for forward and reverse of scraper floor
- Slurry gate, opening 1,500 mm, slurry gate display on the front wall
Spreader aggregate
- Two beater rotors with an outer diameter of 650 mm. Spreader aggregate passage 1,500 mm
- Duplex chain to drove the lower beater rollers
- 2-disc spreader with a disc diameter 1,000 mm / 4 distribution vanes on each
- Disc gearing with shaft Ø 60 mm / overload protection / freewheel drive mechanism, spreading unit protected by 8 mm thick HARDOX wear plates
Safety devices
- Walterscheid drive shaft PWE 580 with cam clutch and freewheel drive mechanism to protect the powertrain and beater rollers
- Overload clutch to protect the disc spreading aggregate
- Freewheeling between the spreader plate transmissions
- If equipped with electrical control system: Speed monitoring of the beater rotors. The bottom chain is stopped when beater rotor speed is < 140 rpm.
Special equipment HS 240
Chassis
| Article no. | Article |
|---|---|
| E20015 | Hydraulic support foot |
| E20019 | Drawbar with ball coupling system D80 |
| E54420 | Hydraulic and height-adjustable drawbar |
| E20040 | Forced steering axle with hydraulic steering |
| E54510 | 4 x parking supports |
| E20065 | BPW axles with borehole for tire pressure regulation system |
| E20072 | Electrical weighing device with 6 cells / instead of interchange system |
| E21029 | Tire 710 / 50 R 26.5 Nokian Country King |
| E21030 | Tire 710 / 50 R 26.5 Michelin CargoXBib HF |
| E21031 | Tire 750 / 45 R 26.5 Alliance 380 |
| E21033 | Tire 800 / 45 R 26.5 Michelin CargoXBib (outer width 3,050 mm) |
| E21034 | Tire 710 / 50 R 30.5 Michelin CargoXBib |
| E21035 | Tire 800 / 45 R 30.5 Michelin CargoXBib |
Body
| Article no. | Article |
|---|---|
| E22160 | Steel body 500 mm, load volume 29 cbm |
| E22026 | Endless floor with 4 die-forged flat link chain type 125 |
| E22300 | Spreader aggregate with 3 beater rollers, opening 1,900 mm, beater rollers with an outer diameter of 550 mm, gate opening 1.900 mm |
| E22032 | Rubber seal on the slurry gate |
| E22031 | Spreading cover, hydraulic, on left side |
| E22035 | Spreading cover, hydraulic, on right side |
| E22070 | LED work lights, per unit |
| E22040 | Protective bar for side walls |
| E22050 | Protection plate for rear hood |
| E24200 | Lighting package: Position lights red / white, side lights yellow, beacon light yellow |
| E24250 | Double lighting / in LED on the spreader aggregate |
Operation
| Article no. | Article |
|---|---|
| E24040 | Electrical operation for spreading cover |
| E24100 | Operating hour counter for electrical operation |
| E24110 | Load counter |
| E24105 | Job calculator with cable harness |
| E24106 | ISO BUS terminal |
| E24108 | CAN BUS module (if equipped with items 24105 + 20072) |
| E24120 | Dosage valve with a sensor for digital opening display |
| E24400 | Automatic lubrication of the roller chain on the spreading aggregate |
| E24410 | Central nipple lubrication system for endless floor and spreading aggregate (17 / 18 lubrication points) |
| E24500 | Electrical central lubrication for all lubrication points on the chassis and attachment, without rotating joints, automat. lubrication of the roller chain on the spreading aggregate |
IMPRESSIONS
Black on white
Our information brochure for the HS-spreader
is available here as a download.
This will provide you with an overview of your product.
Dealer Contact
Find a TEBBE dealer near you.
We have our authorized dealer network to accept orders within Germany. Always competent, always close by.
Finding dealers
Global sales
Support with all issues relating to orders
and deliveries abroad
Always in TEBBE’s good hands: from the initial contact through to punctual delivery.
Our experts will tell you everything you need to know about global orders for our products.
We look forward to hearing from you.
Contact
